/*====================================================================*
 -  Copyright (C) 2001 Leptonica.  All rights reserved.
 -
 -  Redistribution and use in source and binary forms, with or without
 -  modification, are permitted provided that the following conditions
 -  are met:
 -  1. Redistributions of source code must retain the above copyright
 -     notice, this list of conditions and the following disclaimer.
 -  2. Redistributions in binary form must reproduce the above
 -     copyright notice, this list of conditions and the following
 -     disclaimer in the documentation and/or other materials
 -     provided with the distribution.
 -
 -  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 -  ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 -  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 -  A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL ANY
 -  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 -  EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 -  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 -  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
 -  OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 -  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 -  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *====================================================================*/

/*!
 * \file classapp.c
 * <pre>
 *
 *      Top-level jb2 correlation and rank-hausdorff
 *         l_int32         jbCorrelation()
 *         l_int32         jbRankHaus()
 *
 *      Extract and classify words in textline order
 *         JBCLASSER      *jbWordsInTextlines()
 *         l_int32         pixGetWordsInTextlines()
 *         l_int32         pixGetWordBoxesInTextlines()
 *
 *      Extract word and character bounding boxes
 *         l_int32         pixFindWordAndCharacterBoxes()
 *
 *      Use word bounding boxes to compare page images
 *         NUMAA          *boxaExtractSortedPattern()
 *         l_int32         numaaCompareImagesByBoxes()
 *         static l_int32  testLineAlignmentX()
 *         static l_int32  countAlignedMatches()
 *         static void     printRowIndices()
 * </pre>
 */

#ifdef HAVE_CONFIG_H
#include <config_auto.h>
#endif  /* HAVE_CONFIG_H */

#include <string.h>
#include "allheaders.h"

#define L_BUF_SIZE 512                        /*!< size of filename buffer    */
static const l_int32 JB_WORDS_MIN_WIDTH = 5;  /*!< min. word width in pixels  */
static const l_int32 JB_WORDS_MIN_HEIGHT = 3; /*!< min. word height in pixels */

    /* Static comparison functions */
static l_int32 testLineAlignmentX(NUMA *na1, NUMA *na2, l_int32 shiftx,
                                  l_int32 delx, l_int32 nperline);
static l_int32 countAlignedMatches(NUMA *nai1, NUMA *nai2, NUMA *nasx,
                                   NUMA *nasy, l_int32 n1, l_int32 n2,
                                   l_int32 delx, l_int32 dely,
                                   l_int32 nreq, l_int32 *psame,
                                   l_int32 debugflag);
static void printRowIndices(l_int32 *index1, l_int32 n1,
                            l_int32 *index2, l_int32 n2);

/*------------------------------------------------------------------*
 *          Top-level jb2 correlation and rank-hausdorff            *
 *------------------------------------------------------------------*/
/*!
 * \brief   jbCorrelation()
 *
 * \param[in]    dirin        directory of input images
 * \param[in]    thresh       typically ~0.8
 * \param[in]    weight       typically ~0.6
 * \param[in]    components   JB_CONN_COMPS, JB_CHARACTERS, JB_WORDS
 * \param[in]    rootname     for output files
 * \param[in]    firstpage    0-based
 * \param[in]    npages       use 0 for all pages in dirin
 * \param[in]    renderflag   1 to render from templates; 0 to skip
 * \return  0 if OK, 1 on error
 *
 * <pre>
 * Notes:
 *      (1) The images must be 1 bpp.  If they are not, you can convert
 *          them using convertFilesTo1bpp().
 *      (2) See prog/jbcorrelation for generating more output (e.g.,
 *          for debugging)
 * </pre>
 */
l_ok
jbCorrelation(const char  *dirin,
              l_float32    thresh,
              l_float32    weight,
              l_int32      components,
              const char  *rootname,
              l_int32      firstpage,
              l_int32      npages,
              l_int32      renderflag)
{
char        filename[L_BUF_SIZE];
l_int32     nfiles, i, numpages;
JBDATA     *data;
JBCLASSER  *classer;
PIX        *pix;
PIXA       *pixa;
SARRAY     *safiles;

    if (!dirin)
        return ERROR_INT("dirin not defined", __func__, 1);
    if (!rootname)
        return ERROR_INT("rootname not defined", __func__, 1);
    if (components != JB_CONN_COMPS && components != JB_CHARACTERS &&
        components != JB_WORDS)
        return ERROR_INT("components invalid", __func__, 1);

    safiles = getSortedPathnamesInDirectory(dirin, NULL, firstpage, npages);
    nfiles = sarrayGetCount(safiles);

        /* Classify components */
    classer = jbCorrelationInit(components, 0, 0, thresh, weight);
    jbAddPages(classer, safiles);

        /* Save data */
    data = jbDataSave(classer);
    jbDataWrite(rootname, data);

        /* Optionally, render pages using class templates */
    if (renderflag) {
        pixa = jbDataRender(data, FALSE);
        numpages = pixaGetCount(pixa);
        if (numpages != nfiles)
            lept_stderr("numpages = %d, nfiles = %d, not equal!\n",
                        numpages, nfiles);
        for (i = 0; i < numpages; i++) {
            pix = pixaGetPix(pixa, i, L_CLONE);
            snprintf(filename, L_BUF_SIZE, "%s.%04d", rootname, i);
            lept_stderr("filename: %s\n", filename);
            pixWrite(filename, pix, IFF_PNG);
            pixDestroy(&pix);
        }
        pixaDestroy(&pixa);
    }

    sarrayDestroy(&safiles);
    jbClasserDestroy(&classer);
    jbDataDestroy(&data);
    return 0;
}


/*!
 * \brief   jbRankHaus()
 *
 * \param[in]    dirin         directory of input images
 * \param[in]    size          of Sel used for dilation; typ. 2
 * \param[in]    rank          rank value of match; typ. 0.97
 * \param[in]    components    JB_CONN_COMPS, JB_CHARACTERS, JB_WORDS
 * \param[in]    rootname      for output files
 * \param[in]    firstpage     0-based
 * \param[in]    npages        use 0 for all pages in dirin
 * \param[in]    renderflag    1 to render from templates; 0 to skip
 * \return  0 if OK, 1 on error
 *
 * <pre>
 * Notes:
 *      (1) See prog/jbrankhaus for generating more output (e.g.,
 *          for debugging)
 * </pre>
 */
l_ok
jbRankHaus(const char  *dirin,
           l_int32      size,
           l_float32    rank,
           l_int32      components,
           const char  *rootname,
           l_int32      firstpage,
           l_int32      npages,
           l_int32      renderflag)
{
char        filename[L_BUF_SIZE];
l_int32     nfiles, i, numpages;
JBDATA     *data;
JBCLASSER  *classer;
PIX        *pix;
PIXA       *pixa;
SARRAY     *safiles;

    if (!dirin)
        return ERROR_INT("dirin not defined", __func__, 1);
    if (!rootname)
        return ERROR_INT("rootname not defined", __func__, 1);
    if (components != JB_CONN_COMPS && components != JB_CHARACTERS &&
        components != JB_WORDS)
        return ERROR_INT("components invalid", __func__, 1);

    safiles = getSortedPathnamesInDirectory(dirin, NULL, firstpage, npages);
    nfiles = sarrayGetCount(safiles);

        /* Classify components */
    classer = jbRankHausInit(components, 0, 0, size, rank);
    jbAddPages(classer, safiles);

        /* Save data */
    data = jbDataSave(classer);
    jbDataWrite(rootname, data);

        /* Optionally, render pages using class templates */
    if (renderflag) {
        pixa = jbDataRender(data, FALSE);
        numpages = pixaGetCount(pixa);
        if (numpages != nfiles)
            lept_stderr("numpages = %d, nfiles = %d, not equal!\n",
                        numpages, nfiles);
        for (i = 0; i < numpages; i++) {
            pix = pixaGetPix(pixa, i, L_CLONE);
            snprintf(filename, L_BUF_SIZE, "%s.%04d", rootname, i);
            lept_stderr("filename: %s\n", filename);
            pixWrite(filename, pix, IFF_PNG);
            pixDestroy(&pix);
        }
        pixaDestroy(&pixa);
    }

    sarrayDestroy(&safiles);
    jbClasserDestroy(&classer);
    jbDataDestroy(&data);
    return 0;
}



/*------------------------------------------------------------------*
 *           Extract and classify words in textline order           *
 *------------------------------------------------------------------*/
/*!
 * \brief   jbWordsInTextlines()
 *
 * \param[in]    dirin       directory of input pages
 * \param[in]    reduction   1 for full res; 2 for half-res
 * \param[in]    maxwidth    of word mask components, to be kept
 * \param[in]    maxheight   of word mask components, to be kept
 * \param[in]    thresh      on correlation; 0.80 is reasonable
 * \param[in]    weight      for handling thick text; 0.6 is reasonable
 * \param[out]   pnatl       numa with textline index for each component
 * \param[in]    firstpage   0-based
 * \param[in]    npages      use 0 for all pages in dirin
 * \return  classer for the set of pages
 *
 * <pre>
 * Notes:
 *      (1) This is a high-level function.  See prog/jbwords for example
 *          of usage.
 *      (2) Typically, use input of 75 - 150 ppi for finding words.
 * </pre>
 */
JBCLASSER *
jbWordsInTextlines(const char  *dirin,
                   l_int32      reduction,
                   l_int32      maxwidth,
                   l_int32      maxheight,
                   l_float32    thresh,
                   l_float32    weight,
                   NUMA       **pnatl,
                   l_int32      firstpage,
                   l_int32      npages)
{
char       *fname;
l_int32     nfiles, i, w, h;
BOXA       *boxa;
JBCLASSER  *classer;
NUMA       *nai, *natl;
PIX        *pix1, *pix2;
PIXA       *pixa;
SARRAY     *safiles;

    if (!pnatl)
        return (JBCLASSER *)ERROR_PTR("&natl not defined", __func__, NULL);
    *pnatl = NULL;
    if (!dirin)
        return (JBCLASSER *)ERROR_PTR("dirin not defined", __func__, NULL);
    if (reduction != 1 && reduction != 2)
        return (JBCLASSER *)ERROR_PTR("reduction not in {1,2}", __func__, NULL);

    safiles = getSortedPathnamesInDirectory(dirin, NULL, firstpage, npages);
    nfiles = sarrayGetCount(safiles);

        /* Classify components */
    classer = jbCorrelationInit(JB_WORDS, maxwidth, maxheight, thresh, weight);
    classer->safiles = sarrayCopy(safiles);
    natl = numaCreate(0);
    *pnatl = natl;
    for (i = 0; i < nfiles; i++) {
        fname = sarrayGetString(safiles, i, L_NOCOPY);
        if ((pix1 = pixRead(fname)) == NULL) {
            L_WARNING("image file %d not read\n", __func__, i);
            continue;
        }
        if (reduction == 1)
            pix2 = pixClone(pix1);
        else  /* reduction == 2 */
            pix2 = pixReduceRankBinaryCascade(pix1, 1, 0, 0, 0);
        pixGetWordsInTextlines(pix2, JB_WORDS_MIN_WIDTH,
                               JB_WORDS_MIN_HEIGHT, maxwidth, maxheight,
                               &boxa, &pixa, &nai);
        pixGetDimensions(pix2, &w, &h, NULL);
        classer->w = w;
        classer->h = h;
        jbAddPageComponents(classer, pix2, boxa, pixa);
        numaJoin(natl, nai, 0, -1);
        pixDestroy(&pix1);
        pixDestroy(&pix2);
        numaDestroy(&nai);
        boxaDestroy(&boxa);
        pixaDestroy(&pixa);
    }

    sarrayDestroy(&safiles);
    return classer;
}


/*!
 * \brief   pixGetWordsInTextlines()
 *
 * \param[in]    pixs        1 bpp, typ. 75 - 150 ppi
 * \param[in]    minwidth    of saved components; smaller are discarded
 * \param[in]    minheight   of saved components; smaller are discarded
 * \param[in]    maxwidth    of saved components; larger are discarded
 * \param[in]    maxheight   of saved components; larger are discarded
 * \param[out]   pboxad      word boxes sorted in textline line order
 * \param[out]   ppixad      word images sorted in textline line order
 * \param[out]   pnai        index of textline for each word
 * \return  0 if OK, 1 on error
 *
 * <pre>
 * Notes:
 *      (1) The input should be at a resolution of between 75 and 150 ppi.
 *      (2) The four size constraints on saved components are all
 *          scaled by %reduction.
 *      (3) The result are word images (and their b.b.), extracted in
 *          textline order, at either full res or 2x reduction,
 *          and with a numa giving the textline index for each word.
 *      (4) The pixa and boxa interfaces should make this type of
 *          application simple to put together.  The steps are:
 *           ~ generate first estimate of word masks
 *           ~ get b.b. of these, and remove the small and big ones
 *           ~ extract pixa of the word images, using the b.b.
 *           ~ sort actual word images in textline order (2d)
 *           ~ flatten them to a pixa (1d), saving the textline index
 *             for each pix
 *      (5) In an actual application, it may be desirable to pre-filter
 *          the input image to remove large components, to extract
 *          single columns of text, and to deskew them.  For example,
 *          to remove both large components and small noisy components
 *          that can interfere with the statistics used to estimate
 *          parameters for segmenting by words, but still retain text lines,
 *          the following image preprocessing can be done:
 *                Pix *pixt = pixMorphSequence(pixs, "c40.1", 0);
 *                Pix *pixf = pixSelectBySize(pixt, 0, 60, 8,
 *                                     L_SELECT_HEIGHT, L_SELECT_IF_LT, NULL);
 *                pixAnd(pixf, pixf, pixs);  // the filtered image
 *          The closing turns text lines into long blobs, but does not
 *          significantly increase their height.  But if there are many
 *          small connected components in a dense texture, this is likely
 *          to generate tall components that will be eliminated in pixf.
 * </pre>
 */
l_ok
pixGetWordsInTextlines(PIX     *pixs,
                       l_int32  minwidth,
                       l_int32  minheight,
                       l_int32  maxwidth,
                       l_int32  maxheight,
                       BOXA   **pboxad,
                       PIXA   **ppixad,
                       NUMA   **pnai)
{
BOXA    *boxa1, *boxad;
BOXAA   *baa;
NUMA    *nai;
NUMAA   *naa;
PIXA    *pixa1, *pixad;
PIXAA   *paa;

    if (!pboxad || !ppixad || !pnai)
        return ERROR_INT("&boxad, &pixad, &nai not all defined", __func__, 1);
    *pboxad = NULL;
    *ppixad = NULL;
    *pnai = NULL;
    if (!pixs)
        return ERROR_INT("pixs not defined", __func__, 1);

        /* Get the bounding boxes of the words from the word mask. */
    pixWordBoxesByDilation(pixs, minwidth, minheight, maxwidth, maxheight,
                           &boxa1, NULL, NULL);

        /* Generate a pixa of the word images */
    pixa1 = pixaCreateFromBoxa(pixs, boxa1, 0, 0, NULL);

        /* Sort the bounding boxes of these words by line.  We use the
         * index mapping to allow identical sorting of the pixa. */
    baa = boxaSort2d(boxa1, &naa, -1, -1, 4);
    paa = pixaSort2dByIndex(pixa1, naa, L_CLONE);

        /* Flatten the word paa */
    pixad = pixaaFlattenToPixa(paa, &nai, L_CLONE);
    boxad = pixaGetBoxa(pixad, L_COPY);

    *pnai = nai;
    *pboxad = boxad;
    *ppixad = pixad;

    pixaDestroy(&pixa1);
    boxaDestroy(&boxa1);
    boxaaDestroy(&baa);
    pixaaDestroy(&paa);
    numaaDestroy(&naa);
    return 0;
}


/*!
 * \brief   pixGetWordBoxesInTextlines()
 *
 * \param[in]    pixs        1 bpp, typ. 75 - 150 ppi
 * \param[in]    minwidth    of saved components; smaller are discarded
 * \param[in]    minheight   of saved components; smaller are discarded
 * \param[in]    maxwidth    of saved components; larger are discarded
 * \param[in]    maxheight   of saved components; larger are discarded
 * \param[out]   pboxad      word boxes sorted in textline line order
 * \param[out]   pnai        [optional] index of textline for each word
 * \return  0 if OK, 1 on error
 *
 * <pre>
 * Notes:
 *      (1) The input should be at a resolution of between 75 and 150 ppi.
 *      (2) This is a special version of pixGetWordsInTextlines(), that
 *          just finds the word boxes in line order, with a numa
 *          giving the textline index for each word.
 *          See pixGetWordsInTextlines() for more details.
 * </pre>
 */
l_ok
pixGetWordBoxesInTextlines(PIX     *pixs,
                           l_int32  minwidth,
                           l_int32  minheight,
                           l_int32  maxwidth,
                           l_int32  maxheight,
                           BOXA   **pboxad,
                           NUMA   **pnai)
{
BOXA    *boxa1;
BOXAA   *baa;
NUMA    *nai;

    if (pnai) *pnai = NULL;
    if (!pboxad)
        return ERROR_INT("&boxad and &nai not both defined", __func__, 1);
    *pboxad = NULL;
    if (!pixs)
        return ERROR_INT("pixs not defined", __func__, 1);

        /* Get the bounding boxes of the words from the word mask. */
    pixWordBoxesByDilation(pixs, minwidth, minheight, maxwidth, maxheight,
                           &boxa1, NULL, NULL);

        /* 2D sort the bounding boxes of these words. */
    baa = boxaSort2d(boxa1, NULL, 3, -5, 5);

        /* Flatten the boxaa, saving the boxa index for each box */
    *pboxad = boxaaFlattenToBoxa(baa, &nai, L_CLONE);

    if (pnai)
        *pnai = nai;
    else
        numaDestroy(&nai);
    boxaDestroy(&boxa1);
    boxaaDestroy(&baa);
    return 0;
}


/*------------------------------------------------------------------*
 *             Extract word and character bounding boxes            *
 *------------------------------------------------------------------*/
/*!
 * \brief   pixFindWordAndCharacterBoxes()
 *
 * \param[in]    pixs        2, 4, 8 or 32 bpp; colormap OK; typ. 300 ppi
 * \param[in]    boxs        [optional] region to select in pixs
 * \param[in]    thresh      binarization threshold (typ. 100 - 150)
 * \param[out]   pboxaw      return the word boxes
 * \param[out]   pboxaac     return the character boxes
 * \param[in]    debugdir    [optional] for debug images; use NULL to skip
 * \return  0 if OK, 1 on error
 *
 * <pre>
 * Notes:
 *      (1) If %boxs == NULL, the entire input image is used.
 *      (2) Having an input pix that is not 1bpp is necessary to reduce
 *          touching characters by using a low binarization threshold.
 *          Suggested thresholds are between 100 and 150.
 *      (3) The coordinates in the output boxes are global, with respect
 *          to the input image.
 * </pre>
 */
l_ok
pixFindWordAndCharacterBoxes(PIX         *pixs,
                             BOX         *boxs,
                             l_int32      thresh,
                             BOXA       **pboxaw,
                             BOXAA      **pboxaac,
                             const char  *debugdir)
{
char      *debugfile, *subdir;
l_int32    i, xs, ys, xb, yb, nb, loc;
l_float32  scalefact;
BOX       *box1, *box2;
BOXA      *boxa1, *boxa1a, *boxa2, *boxa3, *boxa4, *boxa5, *boxaw;
BOXAA     *boxaac;
PIX       *pix1, *pix2, *pix3, *pix3a, *pix4, *pix5;

    if (pboxaw) *pboxaw = NULL;
    if (pboxaac) *pboxaac = NULL;
    if (!pboxaw || !pboxaac)
        return ERROR_INT("&boxaw and &boxaac not defined", __func__, 1);
    if (!pixs || pixGetDepth(pixs) == 1)
        return ERROR_INT("pixs not defined or 1 bpp", __func__, 1);
    if (thresh > 150)
        L_WARNING("threshold is %d; may be too high\n", __func__, thresh);

    if (boxs) {
        if ((pix1 = pixClipRectangle(pixs, boxs, NULL)) == NULL)
            return ERROR_INT("pix1 not made", __func__, 1);
        boxGetGeometry(boxs, &xs, &ys, NULL, NULL);
    } else {
        pix1 = pixClone(pixs);
        xs = ys = 0;
    }

        /* Convert pix1 to 8 bpp gray if necessary */
    pix2 = pixConvertTo8(pix1, FALSE);

        /* To find the words and letters, work with 1 bpp images and use
         * a low threshold to reduce the number of touching characters. */
    pix3 = pixConvertTo1(pix2, thresh);

        /* Work at about 120 ppi to find the word bounding boxes. */
    pix3a = pixScaleToResolution(pix3, 120.0, 300.0, &scalefact);

        /* First find the words, removing the very small things like
         * dots over the 'i' that weren't included in word boxes. */
    pixGetWordBoxesInTextlines(pix3a, 1, 4, 150, 40, &boxa1a, NULL);
    boxa1 = boxaTransform(boxa1a, 0, 0, 1.0 / scalefact, 1.0 / scalefact);
    if (debugdir) {
        loc = 0;
        subdir = stringReplaceSubstr(debugdir, "/tmp/", "", &loc, NULL);
        lept_mkdir(subdir);
        LEPT_FREE(subdir);
        pix4 = pixConvertTo32(pix2);
        pixRenderBoxaArb(pix4, boxa1, 2, 255, 0, 0);
        debugfile = stringJoin(debugdir, "/words.png");
        pixWrite(debugfile, pix4, IFF_PNG);
        pixDestroy(&pix4);
        LEPT_FREE(debugfile);
    }

        /* Now find the letters at 300 ppi */
    nb = boxaGetCount(boxa1);
    boxaw = boxaCreate(nb);
    boxaac = boxaaCreate(nb);
    *pboxaw = boxaw;
    *pboxaac = boxaac;
    for (i = 0; i < nb; i++) {
        box1 = boxaGetBox(boxa1, i, L_COPY);
        boxGetGeometry(box1, &xb, &yb, NULL, NULL);
        pix4 = pixClipRectangle(pix3, box1, NULL);
            /* Join detached parts of characters vertically */
        pix5 = pixMorphSequence(pix4, "c1.10", 0);
            /* The connected components should mostly be characters */
        boxa2 = pixConnCompBB(pix5, 4);
            /* Remove very small pieces */
        boxa3 = boxaSelectBySize(boxa2, 2, 5, L_SELECT_IF_BOTH,
                                 L_SELECT_IF_GTE, NULL);
            /* Order left to right */
        boxa4 = boxaSort(boxa3, L_SORT_BY_X, L_SORT_INCREASING, NULL);
            /* Express locations with reference to the full input image */
        boxa5 = boxaTransform(boxa4, xs + xb, ys + yb, 1.0, 1.0);
        box2 = boxTransform(box1, xs, ys, 1.0, 1.0);

            /* Ignore any boxa with no boxes after size filtering */
        if (boxaGetCount(boxa5) > 0) {
            boxaAddBox(boxaw, box2, L_INSERT);
            boxaaAddBoxa(boxaac, boxa5, L_INSERT);
        } else {
            boxDestroy(&box2);
            boxaDestroy(&boxa5);
        }
        boxDestroy(&box1);
        pixDestroy(&pix4);
        pixDestroy(&pix5);
        boxaDestroy(&boxa2);
        boxaDestroy(&boxa3);
        boxaDestroy(&boxa4);
    }
    pixDestroy(&pix1);
    pixDestroy(&pix2);
    pixDestroy(&pix3);
    pixDestroy(&pix3a);
    boxaDestroy(&boxa1);
    boxaDestroy(&boxa1a);
    if (debugdir) {
        pix4 = pixConvertTo32(pixs);
        boxa2 = boxaaFlattenToBoxa(boxaac, NULL, L_COPY);
        pixRenderBoxaArb(pix4, boxa2, 2, 255, 0, 0);
        boxa3 = boxaAdjustSides(boxaw, -2, 2, -2, 2);
        pixRenderBoxaArb(pix4, boxa3, 2, 0, 255, 0);
        debugfile = stringJoin(debugdir, "/chars.png");
        pixWrite(debugfile, pix4, IFF_PNG);
        pixDestroy(&pix4);
        boxaDestroy(&boxa2);
        boxaDestroy(&boxa3);
        LEPT_FREE(debugfile);
    }
    return 0;
}


/*------------------------------------------------------------------*
 *           Use word bounding boxes to compare page images         *
 *------------------------------------------------------------------*/
/*!
 * \brief   boxaExtractSortedPattern()
 *
 * \param[in]    boxa    typ. of word bounding boxes, in textline order
 * \param[in]    na      index of textline for each box in boxa
 * \return  naa NUMAA, where each numa represents one textline,
 *                   or NULL on error
 *
 * <pre>
 * Notes:
 *      (1) The input is expected to come from pixGetWordBoxesInTextlines().
 *      (2) Each numa in the output consists of an average y coordinate
 *          of the first box in the textline, followed by pairs of
 *          x coordinates representing the left and right edges of each
 *          of the boxes in the textline.
 * </pre>
 */
NUMAA *
boxaExtractSortedPattern(BOXA  *boxa,
                         NUMA  *na)
{
l_int32  index, nbox, row, prevrow, x, y, w, h;
BOX     *box;
NUMA    *nad = NULL;
NUMAA   *naa;

    if (!boxa)
        return (NUMAA *)ERROR_PTR("boxa not defined", __func__, NULL);
    if (!na)
        return (NUMAA *)ERROR_PTR("na not defined", __func__, NULL);

    naa = numaaCreate(0);
    nbox = boxaGetCount(boxa);
    if (nbox == 0)
        return naa;

    prevrow = -1;
    for (index = 0; index < nbox; index++) {
        box = boxaGetBox(boxa, index, L_CLONE);
        numaGetIValue(na, index, &row);
        if (row > prevrow) {
            if (index > 0)
                numaaAddNuma(naa, nad, L_INSERT);
            nad = numaCreate(0);
            prevrow = row;
            boxGetGeometry(box, NULL, &y, NULL, &h);
            numaAddNumber(nad, y + h / 2);
        }
        boxGetGeometry(box, &x, NULL, &w, NULL);
        numaAddNumber(nad, x);
        numaAddNumber(nad, x + w - 1);
        boxDestroy(&box);
    }
    numaaAddNuma(naa, nad, L_INSERT);

    return naa;
}


/*!
 * \brief   numaaCompareImagesByBoxes()
 *
 * \param[in]    naa1       for image 1, formatted by boxaExtractSortedPattern()
 * \param[in]    naa2       for image 2, formatted by boxaExtractSortedPattern()
 * \param[in]    nperline   number of box regions to be used in each textline
 * \param[in]    nreq       number of complete row matches required
 * \param[in]    maxshiftx  max allowed x shift between two patterns, in pixels
 * \param[in]    maxshifty  max allowed y shift between two patterns, in pixels
 * \param[in]    delx       max allowed difference in x data, after alignment
 * \param[in]    dely       max allowed difference in y data, after alignment
 * \param[out]   psame      1 if %nreq row matches are found; 0 otherwise
 * \param[in]    debugflag  1 for debug output
 * \return  0 if OK, 1 on error
 *
 * <pre>
 * Notes:
 *      (1) Each input numaa describes a set of sorted bounding boxes
 *          (sorted by textline and, within each textline, from
 *          left to right) in the images from which they are derived.
 *          See boxaExtractSortedPattern() for a description of the data
 *          format in each of the input numaa.
 *      (2) This function does an alignment between the input
 *          descriptions of bounding boxes for two images. The
 *          input parameter %nperline specifies the number of boxes
 *          to consider in each line when testing for a match, and
 *          %nreq is the required number of lines that must be well-aligned
 *          to get a match.
 *      (3) Testing by alignment has 3 steps:
 *          (a) Generating the location of word bounding boxes from the
 *              images (prior to calling this function).
 *          (b) Listing all possible pairs of aligned rows, based on
 *              tolerances in horizontal and vertical positions of
 *              the boxes.  Specifically, all pairs of rows are enumerated
 *              whose first %nperline boxes can be brought into close
 *              alignment, based on the delx parameter for boxes in the
 *              line and within the overall the %maxshiftx and %maxshifty
 *              constraints.
 *          (c) Each pair, starting with the first, is used to search
 *              for a set of %nreq - 1 other pairs that can all be aligned
 *              with a difference in global translation of not more
 *              than (%delx, %dely).
 * </pre>
 */
l_ok
numaaCompareImagesByBoxes(NUMAA    *naa1,
                          NUMAA    *naa2,
                          l_int32   nperline,
                          l_int32   nreq,
                          l_int32   maxshiftx,
                          l_int32   maxshifty,
                          l_int32   delx,
                          l_int32   dely,
                          l_int32  *psame,
                          l_int32   debugflag)
{
l_int32   n1, n2, i, j, nbox, y1, y2, xl1, xl2;
l_int32   shiftx, shifty, match;
l_int32  *line1, *line2;  /* indicator for sufficient boxes in a line */
l_int32  *yloc1, *yloc2;  /* arrays of y value for first box in a line */
l_int32  *xleft1, *xleft2;  /* arrays of x value for left side of first box */
NUMA     *na1, *na2, *nai1, *nai2, *nasx, *nasy;

    if (!psame)
        return ERROR_INT("&same not defined", __func__, 1);
    *psame = 0;
    if (!naa1)
        return ERROR_INT("naa1 not defined", __func__, 1);
    if (!naa2)
        return ERROR_INT("naa2 not defined", __func__, 1);
    if (nperline < 1)
        return ERROR_INT("nperline < 1", __func__, 1);
    if (nreq < 1)
        return ERROR_INT("nreq < 1", __func__, 1);

    n1 = numaaGetCount(naa1);
    n2 = numaaGetCount(naa2);
    if (n1 < nreq || n2 < nreq)
        return 0;

        /* Find the lines in naa1 and naa2 with sufficient boxes.
         * Also, find the y-values for each of the lines, and the
         * LH x-values of the first box in each line. */
    line1 = (l_int32 *)LEPT_CALLOC(n1, sizeof(l_int32));
    line2 = (l_int32 *)LEPT_CALLOC(n2, sizeof(l_int32));
    yloc1 = (l_int32 *)LEPT_CALLOC(n1, sizeof(l_int32));
    yloc2 = (l_int32 *)LEPT_CALLOC(n2, sizeof(l_int32));
    xleft1 = (l_int32 *)LEPT_CALLOC(n1, sizeof(l_int32));
    xleft2 = (l_int32 *)LEPT_CALLOC(n2, sizeof(l_int32));
    if (!line1 || !line2 || !yloc1 || !yloc2 || !xleft1 || !xleft2) {
        LEPT_FREE(line1);
        LEPT_FREE(line2);
        LEPT_FREE(yloc1);
        LEPT_FREE(yloc2);
        LEPT_FREE(xleft1);
        LEPT_FREE(xleft2);
        return ERROR_INT("calloc failure for an array", __func__, 1);
    }
    for (i = 0; i < n1; i++) {
        na1 = numaaGetNuma(naa1, i, L_CLONE);
        numaGetIValue(na1, 0, yloc1 + i);
        numaGetIValue(na1, 1, xleft1 + i);
        nbox = (numaGetCount(na1) - 1) / 2;
        if (nbox >= nperline)
            line1[i] = 1;
        numaDestroy(&na1);
    }
    for (i = 0; i < n2; i++) {
        na2 = numaaGetNuma(naa2, i, L_CLONE);
        numaGetIValue(na2, 0, yloc2 + i);
        numaGetIValue(na2, 1, xleft2 + i);
        nbox = (numaGetCount(na2) - 1) / 2;
        if (nbox >= nperline)
            line2[i] = 1;
        numaDestroy(&na2);
    }

        /* Enumerate all possible line matches.  A 'possible' line
         * match is one where the x and y shifts for the first box
         * in each line are within the maxshiftx and maxshifty
         * constraints, and the left and right sides of the remaining
         * (nperline - 1) successive boxes are within delx of each other.
         * The result is a set of four numas giving parameters of
         * each set of matching lines. */
    nai1 = numaCreate(0);  /* line index 1 of match */
    nai2 = numaCreate(0);  /* line index 2 of match */
    nasx = numaCreate(0);  /* shiftx for match */
    nasy = numaCreate(0);  /* shifty for match */
    for (i = 0; i < n1; i++) {
        if (line1[i] == 0) continue;
        y1 = yloc1[i];
        xl1 = xleft1[i];
        na1 = numaaGetNuma(naa1, i, L_CLONE);
        for (j = 0; j < n2; j++) {
            if (line2[j] == 0) continue;
            y2 = yloc2[j];
            if (L_ABS(y1 - y2) > maxshifty) continue;
            xl2 = xleft2[j];
            if (L_ABS(xl1 - xl2) > maxshiftx) continue;
            shiftx = xl1 - xl2;  /* shift to add to x2 values */
            shifty = y1 - y2;  /* shift to add to y2 values */
            na2 = numaaGetNuma(naa2, j, L_CLONE);

                /* Now check if 'nperline' boxes in the two lines match */
            match = testLineAlignmentX(na1, na2, shiftx, delx, nperline);
            if (match) {
                numaAddNumber(nai1, i);
                numaAddNumber(nai2, j);
                numaAddNumber(nasx, shiftx);
                numaAddNumber(nasy, shifty);
            }
            numaDestroy(&na2);
        }
        numaDestroy(&na1);
    }

        /* Determine if there are a sufficient number of mutually
         * aligned matches.  Mutually aligned matches place an additional
         * constraint on the 'possible' matches, where the relative
         * shifts must not exceed the (delx, dely) distances. */
    countAlignedMatches(nai1, nai2, nasx, nasy, n1, n2, delx, dely,
                        nreq, psame, debugflag);

    LEPT_FREE(line1);
    LEPT_FREE(line2);
    LEPT_FREE(yloc1);
    LEPT_FREE(yloc2);
    LEPT_FREE(xleft1);
    LEPT_FREE(xleft2);
    numaDestroy(&nai1);
    numaDestroy(&nai2);
    numaDestroy(&nasx);
    numaDestroy(&nasy);
    return 0;
}


static l_int32
testLineAlignmentX(NUMA    *na1,
                   NUMA    *na2,
                   l_int32  shiftx,
                   l_int32  delx,
                   l_int32  nperline)
{
l_int32  i, xl1, xr1, xl2, xr2, diffl, diffr;

    if (!na1)
        return ERROR_INT("na1 not defined", __func__, 1);
    if (!na2)
        return ERROR_INT("na2 not defined", __func__, 1);

    for (i = 0; i < nperline; i++) {
        numaGetIValue(na1, i + 1, &xl1);
        numaGetIValue(na1, i + 2, &xr1);
        numaGetIValue(na2, i + 1, &xl2);
        numaGetIValue(na2, i + 2, &xr2);
        diffl = L_ABS(xl1 - xl2 - shiftx);
        diffr = L_ABS(xr1 - xr2 - shiftx);
        if (diffl > delx || diffr > delx)
            return 0;
    }

    return 1;
}


/*
 * \brief   countAlignedMatches()
 *
 * \param[in]    nai1, nai2   numas of row pairs for matches
 * \param[in]    nasx, nasy   numas of x and y shifts for the matches
 * \param[in]    n1, n2       number of rows in images 1 and 2
 * \param[in]    delx, dely   allowed difference in shifts of the match,
 *                            compared to the reference match
 * \param[in]    nre1         number of required aligned matches
 * \param[out]   psame        return 1 if %nreq row matches are found;
 *                            0 otherwise
 * \return  0 if OK, 1 on error
 *
 * <pre>
 * Notes:
 *      (1) This takes 4 input arrays giving parameters of all the
 *          line matches.  It looks for the maximum set of aligned
 *          matches (matches with approximately the same overall shifts)
 *          that do not use rows from either image more than once.
 * </pre>
 */
static l_ok
countAlignedMatches(NUMA     *nai1,
                    NUMA     *nai2,
                    NUMA     *nasx,
                    NUMA     *nasy,
                    l_int32   n1,
                    l_int32   n2,
                    l_int32   delx,
                    l_int32   dely,
                    l_int32   nreq,
                    l_int32  *psame,
                    l_int32   debugflag)
{
l_int32   i, j, nm, shiftx, shifty, nmatch, diffx, diffy;
l_int32  *ia1, *ia2, *iasx, *iasy, *index1, *index2;

    if (!nai1 || !nai2 || !nasx || !nasy)
        return ERROR_INT("4 input numas not defined", __func__, 1);
    if (!psame)
        return ERROR_INT("&same not defined", __func__, 1);
    *psame = 0;

        /* Check for sufficient aligned matches, doing a double iteration
         * over the set of raw matches.  The row index arrays
         * are used to verify that the same rows in either image
         * are not used in more than one match.  Whenever there
         * is a match that is properly aligned, those rows are
         * marked in the index arrays.  */
    nm = numaGetCount(nai1);  /* number of matches */
    if (nm < nreq)
        return 0;

    ia1 = numaGetIArray(nai1);
    ia2 = numaGetIArray(nai2);
    iasx = numaGetIArray(nasx);
    iasy = numaGetIArray(nasy);
    index1 = (l_int32 *)LEPT_CALLOC(n1, sizeof(l_int32));  /* watch rows */
    index2 = (l_int32 *)LEPT_CALLOC(n2, sizeof(l_int32));
    if (!index1 || !index2)
        return ERROR_INT("calloc fail for array", __func__, 1);
    for (i = 0; i < nm; i++) {
        if (*psame == 1)
            break;

            /* Reset row index arrays */
        memset(index1, 0, 4 * n1);
        memset(index2, 0, 4 * n2);
        nmatch = 1;
        index1[ia1[i]] = nmatch;  /* mark these rows as taken */
        index2[ia2[i]] = nmatch;
        shiftx = iasx[i];  /* reference shift between two rows */
        shifty = iasy[i];  /* ditto */
        if (nreq == 1) {
            *psame = 1;
            break;
        }
        for (j = 0; j < nm; j++) {
            if (j == i) continue;
                /* Rows must both be different from any previously seen */
            if (index1[ia1[j]] > 0 || index2[ia2[j]] > 0) continue;
                /* Check the shift for this match */
            diffx = L_ABS(shiftx - iasx[j]);
            diffy = L_ABS(shifty - iasy[j]);
            if (diffx > delx || diffy > dely) continue;
                /* We have a match */
            nmatch++;
            index1[ia1[j]] = nmatch;  /* mark the rows */
            index2[ia2[j]] = nmatch;
            if (nmatch >= nreq) {
                *psame = 1;
                if (debugflag)
                    printRowIndices(index1, n1, index2, n2);
                break;
            }
        }
    }

    LEPT_FREE(ia1);
    LEPT_FREE(ia2);
    LEPT_FREE(iasx);
    LEPT_FREE(iasy);
    LEPT_FREE(index1);
    LEPT_FREE(index2);
    return 0;
}


static void
printRowIndices(l_int32  *index1,
                l_int32   n1,
                l_int32  *index2,
                l_int32   n2)
{
l_int32  i;

    lept_stderr("Index1: ");
    for (i = 0; i < n1; i++) {
        if (i && (i % 20 == 0))
            lept_stderr("\n        ");
        lept_stderr("%3d", index1[i]);
    }
    lept_stderr("\n");

    lept_stderr("Index2: ");
    for (i = 0; i < n2; i++) {
        if (i && (i % 20 == 0))
            lept_stderr("\n        ");
        lept_stderr("%3d", index2[i]);
    }
    lept_stderr("\n");
    return;
}