/******************************************************************************
**  Filename:    MergeNF.c
**  Purpose:     Program for merging similar nano-feature protos
**  Author:      Dan Johnson
**
** (c) Copyright Hewlett-Packard Company, 1988.
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
** http://www.apache.org/licenses/LICENSE-2.0
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
******************************************************************************/

#define _USE_MATH_DEFINES // for M_PI
#include <algorithm>
#include <cfloat> // for FLT_MAX
#include <cmath>  // for M_PI
#include <cstdio>
#include <cstring>

#include "cluster.h"
#include "clusttool.h"
#include "featdefs.h"
#include "intproto.h"
#include "mergenf.h"
#include "ocrfeatures.h"
#include "oldlist.h"
#include "params.h"
#include "protos.h"

using namespace tesseract;

/*-------------------once in subfeat---------------------------------*/
static double_VAR(training_angle_match_scale, 1.0, "Angle Match Scale ...");

static double_VAR(training_similarity_midpoint, 0.0075, "Similarity Midpoint ...");

static double_VAR(training_similarity_curl, 2.0, "Similarity Curl ...");

/*-----------------------------once in
 * fasttrain----------------------------------*/
static double_VAR(training_tangent_bbox_pad, 0.5, "Tangent bounding box pad ...");

static double_VAR(training_orthogonal_bbox_pad, 2.5, "Orthogonal bounding box pad ...");

static double_VAR(training_angle_pad, 45.0, "Angle pad ...");

/**
 * Compare protos p1 and p2 and return an estimate of the
 * worst evidence rating that will result for any part of p1
 * that is compared to p2.  In other words, if p1 were broken
 * into pico-features and each pico-feature was matched to p2,
 * what is the worst evidence rating that will be achieved for
 * any pico-feature.
 *
 * @param p1, p2    protos to be compared
 *
 * Globals: none
 *
 * @return Worst possible result when matching p1 to p2.
 */
float CompareProtos(PROTO_STRUCT *p1, PROTO_STRUCT *p2) {
  float WorstEvidence = WORST_EVIDENCE;
  float Evidence;
  float Angle, Length;

  /* if p1 and p2 are not close in length, don't let them match */
  Length = std::fabs(p1->Length - p2->Length);
  if (Length > MAX_LENGTH_MISMATCH) {
    return (0.0);
  }

  /* create a dummy pico-feature to be used for comparisons */
  auto Feature = new FEATURE_STRUCT(&PicoFeatDesc);
  Feature->Params[PicoFeatDir] = p1->Angle;

  /* convert angle to radians */
  Angle = p1->Angle * 2.0 * M_PI;

  /* find distance from center of p1 to 1/2 picofeat from end */
  Length = p1->Length / 2.0 - GetPicoFeatureLength() / 2.0;
  if (Length < 0) {
    Length = 0;
  }

  /* set the dummy pico-feature at one end of p1 and match it to p2 */
  Feature->Params[PicoFeatX] = p1->X + std::cos(Angle) * Length;
  Feature->Params[PicoFeatY] = p1->Y + std::sin(Angle) * Length;
  if (DummyFastMatch(Feature, p2)) {
    Evidence = SubfeatureEvidence(Feature, p2);
    if (Evidence < WorstEvidence) {
      WorstEvidence = Evidence;
    }
  } else {
    delete Feature;
    return 0.0;
  }

  /* set the dummy pico-feature at the other end of p1 and match it to p2 */
  Feature->Params[PicoFeatX] = p1->X - std::cos(Angle) * Length;
  Feature->Params[PicoFeatY] = p1->Y - std::sin(Angle) * Length;
  if (DummyFastMatch(Feature, p2)) {
    Evidence = SubfeatureEvidence(Feature, p2);
    if (Evidence < WorstEvidence) {
      WorstEvidence = Evidence;
    }
  } else {
    delete Feature;
    return 0.0;
  }

  delete Feature;
  return (WorstEvidence);

} /* CompareProtos */

/**
 * This routine computes a proto which is the weighted
 * average of protos p1 and p2.  The new proto is returned
 * in MergedProto.
 *
 * @param p1, p2    protos to be merged
 * @param w1, w2    weight of each proto
 * @param MergedProto place to put resulting merged proto
 */
void ComputeMergedProto(PROTO_STRUCT *p1, PROTO_STRUCT *p2, float w1, float w2, PROTO_STRUCT *MergedProto) {
  float TotalWeight;

  TotalWeight = w1 + w2;
  w1 /= TotalWeight;
  w2 /= TotalWeight;

  MergedProto->X = p1->X * w1 + p2->X * w2;
  MergedProto->Y = p1->Y * w1 + p2->Y * w2;
  MergedProto->Length = p1->Length * w1 + p2->Length * w2;
  MergedProto->Angle = p1->Angle * w1 + p2->Angle * w2;
  FillABC(MergedProto);
} /* ComputeMergedProto */

/**
 * This routine searches through all of the prototypes in
 * Class and returns the id of the proto which would provide
 * the best approximation of Prototype.  If no close
 * approximation can be found, NO_PROTO is returned.
 *
 * @param Class   class to search for matching old proto in
 * @param NumMerged # of protos merged into each proto of Class
 * @param  Prototype new proto to find match for
 *
 * Globals: none
 *
 * @return Id of closest proto in Class or NO_PROTO.
 */
int FindClosestExistingProto(CLASS_TYPE Class, int NumMerged[], PROTOTYPE *Prototype) {
  PROTO_STRUCT NewProto;
  PROTO_STRUCT MergedProto;
  int Pid;
  PROTO_STRUCT *Proto;
  int BestProto;
  float BestMatch;
  float Match, OldMatch, NewMatch;

  MakeNewFromOld(&NewProto, Prototype);

  BestProto = NO_PROTO;
  BestMatch = WORST_MATCH_ALLOWED;
  for (Pid = 0; Pid < Class->NumProtos; Pid++) {
    Proto = ProtoIn(Class, Pid);
    ComputeMergedProto(Proto, &NewProto, static_cast<float>(NumMerged[Pid]), 1.0, &MergedProto);
    OldMatch = CompareProtos(Proto, &MergedProto);
    NewMatch = CompareProtos(&NewProto, &MergedProto);
    Match = std::min(OldMatch, NewMatch);
    if (Match > BestMatch) {
      BestProto = Pid;
      BestMatch = Match;
    }
  }
  return BestProto;
} /* FindClosestExistingProto */

/**
 * This fills in the fields of the New proto based on the
 * fields of the Old proto.
 *
 * @param New new proto to be filled in
 * @param Old old proto to be converted
 *
 *  Globals: none
 */
void MakeNewFromOld(PROTO_STRUCT *New, PROTOTYPE *Old) {
  New->X = CenterX(Old->Mean);
  New->Y = CenterY(Old->Mean);
  New->Length = LengthOf(Old->Mean);
  New->Angle = OrientationOf(Old->Mean);
  FillABC(New);
} /* MakeNewFromOld */

/*-------------------once in subfeat---------------------------------*/

/**
 * @name SubfeatureEvidence
 *
 * Compare a feature to a prototype. Print the result.
 */
float SubfeatureEvidence(FEATURE Feature, PROTO_STRUCT *Proto) {
  float Distance;
  float Dangle;

  Dangle = Proto->Angle - Feature->Params[PicoFeatDir];
  if (Dangle < -0.5) {
    Dangle += 1.0;
  }
  if (Dangle > 0.5) {
    Dangle -= 1.0;
  }
  Dangle *= training_angle_match_scale;

  Distance =
      Proto->A * Feature->Params[PicoFeatX] + Proto->B * Feature->Params[PicoFeatY] + Proto->C;

  return (EvidenceOf(Distance * Distance + Dangle * Dangle));
}

/**
 * @name EvidenceOf
 *
 * Return the new type of evidence number corresponding to this
 * distance value.  This number is no longer based on the chi squared
 * approximation.  The equation that represents the transform is:
 *       1 / (1 + (sim / midpoint) ^ curl)
 */
double EvidenceOf(double Similarity) {
  Similarity /= training_similarity_midpoint;

  if (training_similarity_curl == 3) {
    Similarity = Similarity * Similarity * Similarity;
  } else if (training_similarity_curl == 2) {
    Similarity = Similarity * Similarity;
  } else {
    Similarity = pow(Similarity, training_similarity_curl);
  }

  return (1.0 / (1.0 + Similarity));
}

/**
 * This routine returns true if Feature would be matched
 * by a fast match table built from Proto.
 *
 * @param Feature   feature to be "fast matched" to proto
 * @param Proto   proto being "fast matched" against
 *
 * Globals:
 * - training_tangent_bbox_pad    bounding box pad tangent to proto
 * - training_orthogonal_bbox_pad bounding box pad orthogonal to proto
 *
 * @return true if feature could match Proto.
 */
bool DummyFastMatch(FEATURE Feature, PROTO_STRUCT *Proto) {
  FRECT BoundingBox;
  float MaxAngleError;
  float AngleError;

  MaxAngleError = training_angle_pad / 360.0;
  AngleError = std::fabs(Proto->Angle - Feature->Params[PicoFeatDir]);
  if (AngleError > 0.5) {
    AngleError = 1.0 - AngleError;
  }

  if (AngleError > MaxAngleError) {
    return false;
  }

  ComputePaddedBoundingBox(Proto, training_tangent_bbox_pad * GetPicoFeatureLength(),
                           training_orthogonal_bbox_pad * GetPicoFeatureLength(), &BoundingBox);

  return PointInside(&BoundingBox, Feature->Params[PicoFeatX], Feature->Params[PicoFeatY]);
} /* DummyFastMatch */

/**
 * This routine computes a bounding box that encloses the
 * specified proto along with some padding.  The
 * amount of padding is specified as separate distances
 * in the tangential and orthogonal directions.
 *
 * @param Proto   proto to compute bounding box for
 * @param TangentPad  amount of pad to add in direction of segment
 * @param OrthogonalPad amount of pad to add orthogonal to segment
 * @param[out] BoundingBox place to put results
 */
void ComputePaddedBoundingBox(PROTO_STRUCT *Proto, float TangentPad, float OrthogonalPad,
                              FRECT *BoundingBox) {
  float Length = Proto->Length / 2.0 + TangentPad;
  float Angle = Proto->Angle * 2.0 * M_PI;
  float CosOfAngle = fabs(std::cos(Angle));
  float SinOfAngle = fabs(std::sin(Angle));

  float Pad = std::max(CosOfAngle * Length, SinOfAngle * OrthogonalPad);
  BoundingBox->MinX = Proto->X - Pad;
  BoundingBox->MaxX = Proto->X + Pad;

  Pad = std::max(SinOfAngle * Length, CosOfAngle * OrthogonalPad);
  BoundingBox->MinY = Proto->Y - Pad;
  BoundingBox->MaxY = Proto->Y + Pad;

} /* ComputePaddedBoundingBox */

/**
 * Return true if point (X,Y) is inside of Rectangle.
 *
 * Globals: none
 *
 * @return true if point (X,Y) is inside of Rectangle.
 */
bool PointInside(FRECT *Rectangle, float X, float Y) {
  return (X >= Rectangle->MinX) && (X <= Rectangle->MaxX) && (Y >= Rectangle->MinY) &&
         (Y <= Rectangle->MaxY);
} /* PointInside */