--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mupdf-source/thirdparty/curl/winbuild/Makefile.vc	Mon Sep 15 11:43:07 2025 +0200
@@ -0,0 +1,290 @@
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1999 - 2019, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at https://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+#***************************************************************************
+
+!IF "$(MODE)"=="static"
+TARGET = $(LIB_NAME_STATIC)
+AS_DLL = false
+CFGSET=true
+!ELSEIF "$(MODE)"=="dll"
+TARGET = $(LIB_NAME_DLL)
+AS_DLL = true
+CFGSET=true
+!ELSE
+!MESSAGE Invalid mode: $(MODE)
+
+#######################
+# Usage
+#
+
+!MESSAGE Usage: nmake /f Makefile.vc mode=<static or dll> <options>
+!MESSAGE where <options> is one or many of:
+!MESSAGE   VC=<6,7,8,9,10,11,12,14,15>    - VC versions
+!MESSAGE   WITH_DEVEL=<path>              - Paths for the development files (SSL, zlib, etc.)
+!MESSAGE                                    Defaults to curl's sibling directory deps: ../deps
+!MESSAGE                                    Libraries can be fetched at https://windows.php.net/downloads/php-sdk/deps/
+!MESSAGE                                    Uncompress them into the deps folder.
+!MESSAGE   WITH_PREFIX=<path>             - Installation directory path
+!MESSAGE                                    Defaults to a configuration dependent (SSL, zlib, etc.)
+!MESSAGE                                    directory inside curl's subdirectory builds: ./builds
+!MESSAGE                                    Use backslashes as path separator
+!MESSAGE   WITH_SSL=<dll or static>       - Enable OpenSSL support, DLL or static
+!MESSAGE   WITH_NGHTTP2=<dll or static>   - Enable HTTP/2 support, DLL or static
+!MESSAGE   WITH_CARES=<dll or static>     - Enable c-ares support, DLL or static
+!MESSAGE   WITH_ZLIB=<dll or static>      - Enable zlib support, DLL or static
+!MESSAGE   WITH_SSH2=<dll or static>      - Enable libSSH2 support, DLL or static
+!MESSAGE   WITH_MBEDTLS=<dll or static>   - Enable mbedTLS support, DLL or static
+!MESSAGE   ENABLE_IDN=<yes or no>         - Enable use of Windows IDN APIs, defaults to yes
+!MESSAGE                                    Requires Windows Vista or later
+!MESSAGE   ENABLE_IPV6=<yes or no>        - Enable IPv6, defaults to yes
+!MESSAGE   ENABLE_SSPI=<yes or no>        - Enable SSPI support, defaults to yes
+!MESSAGE   ENABLE_WINSSL=<yes or no>      - Enable native Windows SSL support, defaults to yes
+!MESSAGE   ENABLE_OPENSSL_AUTO_LOAD_CONFIG=<yes or no>
+!MESSAGE                                  - Whether the OpenSSL configuration will be loaded automatically, defaults to yes
+!MESSAGE   GEN_PDB=<yes or no>            - Generate Program Database (debug symbols for release build)
+!MESSAGE   DEBUG=<yes or no>              - Debug builds
+!MESSAGE   MACHINE=<x86 or x64>           - Target architecture (default x64 on AMD64, x86 on others)
+!MESSAGE   CARES_PATH=<path to cares>     - Custom path for c-ares
+!MESSAGE   MBEDTLS_PATH=<path to mbedTLS> - Custom path for mbedTLS
+!MESSAGE   NGHTTP2_PATH=<path to HTTP/2>  - Custom path for nghttp2
+!MESSAGE   SSH2_PATH=<path to libSSH2>    - Custom path for libSSH2
+!MESSAGE   SSL_PATH=<path to OpenSSL>     - Custom path for OpenSSL
+!MESSAGE   ZLIB_PATH=<path to zlib>       - Custom path for zlib
+!ERROR please choose a valid mode
+
+!ENDIF
+
+!INCLUDE "../lib/Makefile.inc"
+LIBCURL_OBJS=$(CSOURCES:.c=.obj)
+
+!INCLUDE "../src/Makefile.inc"
+
+# tool_hugehelp has a special rule
+CURL_OBJS=$(CURL_CFILES:tool_hugehelp.c=)
+
+CURL_OBJS=$(CURL_OBJS:.c=.obj)
+
+
+# backwards compatible check for USE_SSPI
+!IFDEF USE_SSPI
+ENABLE_SSPI = $(USE_SSPI)
+!ENDIF
+
+# default options
+
+!IFNDEF MACHINE
+# Note: nmake magically changes the value of PROCESSOR_ARCHITECTURE from "AMD64"
+# to "x86" when building in a 32 bit build environment on a 64 bit machine.
+!IF "$(PROCESSOR_ARCHITECTURE)"=="AMD64"
+MACHINE = x64
+!ELSE
+MACHINE = x86
+!ENDIF
+!ENDIF
+
+!IFNDEF ENABLE_IDN
+USE_IDN = true
+!ELSEIF "$(ENABLE_IDN)"=="yes"
+USE_IDN = true
+!ELSEIF "$(ENABLE_IDN)"=="no"
+USE_IDN = false
+!ENDIF
+
+!IFNDEF ENABLE_IPV6
+USE_IPV6 = true
+!ELSEIF "$(ENABLE_IPV6)"=="yes"
+USE_IPV6 = true
+!ELSEIF "$(ENABLE_IPV6)"=="no"
+USE_IPV6 = false
+!ENDIF
+
+!IFNDEF ENABLE_SSPI
+USE_SSPI = true
+!ELSEIF "$(ENABLE_SSPI)"=="yes"
+USE_SSPI = true
+!ELSEIF "$(ENABLE_SSPI)"=="no"
+USE_SSPI = false
+!ENDIF
+
+!IFNDEF ENABLE_WINSSL
+!IF DEFINED(WITH_SSL) || DEFINED(WITH_MBEDTLS)
+USE_WINSSL = false
+!ELSE
+USE_WINSSL = $(USE_SSPI)
+!ENDIF
+!ELSEIF "$(ENABLE_WINSSL)"=="yes"
+USE_WINSSL = true
+!ELSEIF "$(ENABLE_WINSSL)"=="no"
+USE_WINSSL = false
+!ENDIF
+
+!IFNDEF ENABLE_OPENSSL_AUTO_LOAD_CONFIG
+ENABLE_OPENSSL_AUTO_LOAD_CONFIG = true
+!ELSEIF "$(ENABLE_OPENSSL_AUTO_LOAD_CONFIG)"=="yes"
+!UNDEF ENABLE_OPENSSL_AUTO_LOAD_CONFIG
+ENABLE_OPENSSL_AUTO_LOAD_CONFIG = true
+!ELSEIF "$(ENABLE_OPENSSL_AUTO_LOAD_CONFIG)"=="no"
+!UNDEF ENABLE_OPENSSL_AUTO_LOAD_CONFIG
+ENABLE_OPENSSL_AUTO_LOAD_CONFIG = false
+!ENDIF
+
+CONFIG_NAME_LIB = libcurl
+
+!IF "$(WITH_SSL)"=="dll"
+USE_SSL = true
+SSL     = dll
+!ELSEIF "$(WITH_SSL)"=="static"
+USE_SSL = true
+SSL     = static
+!ENDIF
+
+!IF "$(ENABLE_NGHTTP2)"=="yes"
+# compatibility bit, WITH_NGHTTP2 is the correct flag
+WITH_NGHTTP2 = dll
+USE_NGHTTP2  = true
+NGHTTP2      = dll
+!ELSEIF "$(WITH_NGHTTP2)"=="dll"
+USE_NGHTTP2 = true
+NGHTTP2     = dll
+!ELSEIF "$(WITH_NGHTTP2)"=="static"
+USE_NGHTTP2 = true
+NGHTTP2     = static
+!ENDIF
+
+!IFNDEF USE_NGHTTP2
+USE_NGHTTP2 = false
+!ENDIF
+
+!IF "$(WITH_MBEDTLS)"=="dll" || "$(WITH_MBEDTLS)"=="static"
+USE_MBEDTLS = true
+MBEDTLS     = $(WITH_MBEDTLS)
+!ENDIF
+
+!IF "$(WITH_CARES)"=="dll"
+USE_CARES = true
+CARES     = dll
+!ELSEIF "$(WITH_CARES)"=="static"
+USE_CARES = true
+CARES     = static
+!ENDIF
+
+!IF "$(WITH_ZLIB)"=="dll"
+USE_ZLIB = true
+ZLIB     = dll
+!ELSEIF "$(WITH_ZLIB)"=="static"
+USE_ZLIB = true
+ZLIB     = static
+!ENDIF
+
+!IF "$(WITH_SSH2)"=="dll"
+USE_SSH2 = true
+SSH2     = dll
+!ELSEIF "$(WITH_SSH2)"=="static"
+USE_SSH2 = true
+SSH2     = static
+!ENDIF
+
+CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-vc$(VC)-$(MACHINE)
+
+!IF "$(DEBUG)"=="yes"
+CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-debug
+!ELSE
+CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-release
+!ENDIF
+
+!IF "$(AS_DLL)"=="true"
+CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-dll
+!ELSE
+CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-static
+!ENDIF
+
+!IF "$(USE_SSL)"=="true"
+CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-ssl-$(SSL)
+!ENDIF
+
+!IF "$(USE_MBEDTLS)"=="true"
+CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-mbedtls-$(MBEDTLS)
+!ENDIF
+
+!IF "$(USE_CARES)"=="true"
+CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-cares-$(CARES)
+!ENDIF
+
+!IF "$(USE_ZLIB)"=="true"
+CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-zlib-$(ZLIB)
+!ENDIF
+
+!IF "$(USE_SSH2)"=="true"
+CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-ssh2-$(SSH2)
+!ENDIF
+
+!IF "$(USE_IPV6)"=="true"
+CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-ipv6
+!ENDIF
+
+!IF "$(USE_SSPI)"=="true"
+CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-sspi
+!ENDIF
+
+!IF "$(USE_WINSSL)"=="true"
+CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-winssl
+!ENDIF
+
+!IF "$(USE_NGHTTP2)"=="true"
+CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-nghttp2-$(NGHTTP2)
+!ENDIF
+
+!MESSAGE configuration name: $(CONFIG_NAME_LIB)
+
+BUILD_DIR=../builds/$(CONFIG_NAME_LIB)
+LIBCURL_DIROBJ = ..\builds\$(CONFIG_NAME_LIB)-obj-lib
+CURL_DIROBJ = ..\builds\$(CONFIG_NAME_LIB)-obj-curl
+DIRDIST = ..\builds\$(CONFIG_NAME_LIB)\
+
+$(MODE):
+	@SET DIROBJ=$(LIBCURL_DIROBJ)
+	@SET MACRO_NAME=LIBCURL_OBJS
+	@SET OUTFILE=LIBCURL_OBJS.inc
+	@CALL gen_resp_file.bat $(LIBCURL_OBJS)
+
+	@SET DIROBJ=$(CURL_DIROBJ)
+	@SET MACRO_NAME=CURL_OBJS
+	@SET OUTFILE=CURL_OBJS.inc
+	@CALL gen_resp_file.bat $(CURL_OBJS)
+
+	@SET CONFIG_NAME_LIB=$(CONFIG_NAME_LIB)
+	@SET MACHINE=$(MACHINE)
+	@SET USE_NGHTTP2=$(USE_NGHTTP2)
+	@SET USE_IDN=$(USE_IDN)
+	@SET USE_IPV6=$(USE_IPV6)
+	@SET USE_SSPI=$(USE_SSPI)
+	@SET USE_WINSSL=$(USE_WINSSL)
+# compatibility bit
+	@SET WITH_NGHTTP2=$(WITH_NGHTTP2)
+
+	@$(MAKE) /NOLOGO /F MakefileBuild.vc
+
+copy_from_lib:
+	echo copying .c...
+	FOR %%i IN ($(CURLX_CFILES:/=\)) DO copy %%i ..\src\
+
+clean:
+	$(MAKE) /NOLOGO /F MakefileBuild.vc $@