#***************************************************************************
#                                  _   _ ____  _
#  Project                     ___| | | |  _ \| |
#                             / __| | | | |_) | |
#                            | (__| |_| |  _ <| |___
#                             \___|\___/|_| \_\_____|
#
# Copyright (C) 1999 - 2019, Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# are also available at https://curl.haxx.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
# furnished to do so, under the terms of the COPYING file.
#
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
#***************************************************************************

!IF "$(MODE)"=="static"
TARGET = $(LIB_NAME_STATIC)
AS_DLL = false
CFGSET=true
!ELSEIF "$(MODE)"=="dll"
TARGET = $(LIB_NAME_DLL)
AS_DLL = true
CFGSET=true
!ELSE
!MESSAGE Invalid mode: $(MODE)

#######################
# Usage
#

!MESSAGE Usage: nmake /f Makefile.vc mode=<static or dll> <options>
!MESSAGE where <options> is one or many of:
!MESSAGE   VC=<6,7,8,9,10,11,12,14,15>    - VC versions
!MESSAGE   WITH_DEVEL=<path>              - Paths for the development files (SSL, zlib, etc.)
!MESSAGE                                    Defaults to curl's sibling directory deps: ../deps
!MESSAGE                                    Libraries can be fetched at https://windows.php.net/downloads/php-sdk/deps/
!MESSAGE                                    Uncompress them into the deps folder.
!MESSAGE   WITH_PREFIX=<path>             - Installation directory path
!MESSAGE                                    Defaults to a configuration dependent (SSL, zlib, etc.)
!MESSAGE                                    directory inside curl's subdirectory builds: ./builds
!MESSAGE                                    Use backslashes as path separator
!MESSAGE   WITH_SSL=<dll or static>       - Enable OpenSSL support, DLL or static
!MESSAGE   WITH_NGHTTP2=<dll or static>   - Enable HTTP/2 support, DLL or static
!MESSAGE   WITH_CARES=<dll or static>     - Enable c-ares support, DLL or static
!MESSAGE   WITH_ZLIB=<dll or static>      - Enable zlib support, DLL or static
!MESSAGE   WITH_SSH2=<dll or static>      - Enable libSSH2 support, DLL or static
!MESSAGE   WITH_MBEDTLS=<dll or static>   - Enable mbedTLS support, DLL or static
!MESSAGE   ENABLE_IDN=<yes or no>         - Enable use of Windows IDN APIs, defaults to yes
!MESSAGE                                    Requires Windows Vista or later
!MESSAGE   ENABLE_IPV6=<yes or no>        - Enable IPv6, defaults to yes
!MESSAGE   ENABLE_SSPI=<yes or no>        - Enable SSPI support, defaults to yes
!MESSAGE   ENABLE_WINSSL=<yes or no>      - Enable native Windows SSL support, defaults to yes
!MESSAGE   ENABLE_OPENSSL_AUTO_LOAD_CONFIG=<yes or no>
!MESSAGE                                  - Whether the OpenSSL configuration will be loaded automatically, defaults to yes
!MESSAGE   GEN_PDB=<yes or no>            - Generate Program Database (debug symbols for release build)
!MESSAGE   DEBUG=<yes or no>              - Debug builds
!MESSAGE   MACHINE=<x86 or x64>           - Target architecture (default x64 on AMD64, x86 on others)
!MESSAGE   CARES_PATH=<path to cares>     - Custom path for c-ares
!MESSAGE   MBEDTLS_PATH=<path to mbedTLS> - Custom path for mbedTLS
!MESSAGE   NGHTTP2_PATH=<path to HTTP/2>  - Custom path for nghttp2
!MESSAGE   SSH2_PATH=<path to libSSH2>    - Custom path for libSSH2
!MESSAGE   SSL_PATH=<path to OpenSSL>     - Custom path for OpenSSL
!MESSAGE   ZLIB_PATH=<path to zlib>       - Custom path for zlib
!ERROR please choose a valid mode

!ENDIF

!INCLUDE "../lib/Makefile.inc"
LIBCURL_OBJS=$(CSOURCES:.c=.obj)

!INCLUDE "../src/Makefile.inc"

# tool_hugehelp has a special rule
CURL_OBJS=$(CURL_CFILES:tool_hugehelp.c=)

CURL_OBJS=$(CURL_OBJS:.c=.obj)


# backwards compatible check for USE_SSPI
!IFDEF USE_SSPI
ENABLE_SSPI = $(USE_SSPI)
!ENDIF

# default options

!IFNDEF MACHINE
# Note: nmake magically changes the value of PROCESSOR_ARCHITECTURE from "AMD64"
# to "x86" when building in a 32 bit build environment on a 64 bit machine.
!IF "$(PROCESSOR_ARCHITECTURE)"=="AMD64"
MACHINE = x64
!ELSE
MACHINE = x86
!ENDIF
!ENDIF

!IFNDEF ENABLE_IDN
USE_IDN = true
!ELSEIF "$(ENABLE_IDN)"=="yes"
USE_IDN = true
!ELSEIF "$(ENABLE_IDN)"=="no"
USE_IDN = false
!ENDIF

!IFNDEF ENABLE_IPV6
USE_IPV6 = true
!ELSEIF "$(ENABLE_IPV6)"=="yes"
USE_IPV6 = true
!ELSEIF "$(ENABLE_IPV6)"=="no"
USE_IPV6 = false
!ENDIF

!IFNDEF ENABLE_SSPI
USE_SSPI = true
!ELSEIF "$(ENABLE_SSPI)"=="yes"
USE_SSPI = true
!ELSEIF "$(ENABLE_SSPI)"=="no"
USE_SSPI = false
!ENDIF

!IFNDEF ENABLE_WINSSL
!IF DEFINED(WITH_SSL) || DEFINED(WITH_MBEDTLS)
USE_WINSSL = false
!ELSE
USE_WINSSL = $(USE_SSPI)
!ENDIF
!ELSEIF "$(ENABLE_WINSSL)"=="yes"
USE_WINSSL = true
!ELSEIF "$(ENABLE_WINSSL)"=="no"
USE_WINSSL = false
!ENDIF

!IFNDEF ENABLE_OPENSSL_AUTO_LOAD_CONFIG
ENABLE_OPENSSL_AUTO_LOAD_CONFIG = true
!ELSEIF "$(ENABLE_OPENSSL_AUTO_LOAD_CONFIG)"=="yes"
!UNDEF ENABLE_OPENSSL_AUTO_LOAD_CONFIG
ENABLE_OPENSSL_AUTO_LOAD_CONFIG = true
!ELSEIF "$(ENABLE_OPENSSL_AUTO_LOAD_CONFIG)"=="no"
!UNDEF ENABLE_OPENSSL_AUTO_LOAD_CONFIG
ENABLE_OPENSSL_AUTO_LOAD_CONFIG = false
!ENDIF

CONFIG_NAME_LIB = libcurl

!IF "$(WITH_SSL)"=="dll"
USE_SSL = true
SSL     = dll
!ELSEIF "$(WITH_SSL)"=="static"
USE_SSL = true
SSL     = static
!ENDIF

!IF "$(ENABLE_NGHTTP2)"=="yes"
# compatibility bit, WITH_NGHTTP2 is the correct flag
WITH_NGHTTP2 = dll
USE_NGHTTP2  = true
NGHTTP2      = dll
!ELSEIF "$(WITH_NGHTTP2)"=="dll"
USE_NGHTTP2 = true
NGHTTP2     = dll
!ELSEIF "$(WITH_NGHTTP2)"=="static"
USE_NGHTTP2 = true
NGHTTP2     = static
!ENDIF

!IFNDEF USE_NGHTTP2
USE_NGHTTP2 = false
!ENDIF

!IF "$(WITH_MBEDTLS)"=="dll" || "$(WITH_MBEDTLS)"=="static"
USE_MBEDTLS = true
MBEDTLS     = $(WITH_MBEDTLS)
!ENDIF

!IF "$(WITH_CARES)"=="dll"
USE_CARES = true
CARES     = dll
!ELSEIF "$(WITH_CARES)"=="static"
USE_CARES = true
CARES     = static
!ENDIF

!IF "$(WITH_ZLIB)"=="dll"
USE_ZLIB = true
ZLIB     = dll
!ELSEIF "$(WITH_ZLIB)"=="static"
USE_ZLIB = true
ZLIB     = static
!ENDIF

!IF "$(WITH_SSH2)"=="dll"
USE_SSH2 = true
SSH2     = dll
!ELSEIF "$(WITH_SSH2)"=="static"
USE_SSH2 = true
SSH2     = static
!ENDIF

CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-vc$(VC)-$(MACHINE)

!IF "$(DEBUG)"=="yes"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-debug
!ELSE
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-release
!ENDIF

!IF "$(AS_DLL)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-dll
!ELSE
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-static
!ENDIF

!IF "$(USE_SSL)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-ssl-$(SSL)
!ENDIF

!IF "$(USE_MBEDTLS)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-mbedtls-$(MBEDTLS)
!ENDIF

!IF "$(USE_CARES)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-cares-$(CARES)
!ENDIF

!IF "$(USE_ZLIB)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-zlib-$(ZLIB)
!ENDIF

!IF "$(USE_SSH2)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-ssh2-$(SSH2)
!ENDIF

!IF "$(USE_IPV6)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-ipv6
!ENDIF

!IF "$(USE_SSPI)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-sspi
!ENDIF

!IF "$(USE_WINSSL)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-winssl
!ENDIF

!IF "$(USE_NGHTTP2)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-nghttp2-$(NGHTTP2)
!ENDIF

!MESSAGE configuration name: $(CONFIG_NAME_LIB)

BUILD_DIR=../builds/$(CONFIG_NAME_LIB)
LIBCURL_DIROBJ = ..\builds\$(CONFIG_NAME_LIB)-obj-lib
CURL_DIROBJ = ..\builds\$(CONFIG_NAME_LIB)-obj-curl
DIRDIST = ..\builds\$(CONFIG_NAME_LIB)\

$(MODE):
	@SET DIROBJ=$(LIBCURL_DIROBJ)
	@SET MACRO_NAME=LIBCURL_OBJS
	@SET OUTFILE=LIBCURL_OBJS.inc
	@CALL gen_resp_file.bat $(LIBCURL_OBJS)

	@SET DIROBJ=$(CURL_DIROBJ)
	@SET MACRO_NAME=CURL_OBJS
	@SET OUTFILE=CURL_OBJS.inc
	@CALL gen_resp_file.bat $(CURL_OBJS)

	@SET CONFIG_NAME_LIB=$(CONFIG_NAME_LIB)
	@SET MACHINE=$(MACHINE)
	@SET USE_NGHTTP2=$(USE_NGHTTP2)
	@SET USE_IDN=$(USE_IDN)
	@SET USE_IPV6=$(USE_IPV6)
	@SET USE_SSPI=$(USE_SSPI)
	@SET USE_WINSSL=$(USE_WINSSL)
# compatibility bit
	@SET WITH_NGHTTP2=$(WITH_NGHTTP2)

	@$(MAKE) /NOLOGO /F MakefileBuild.vc

copy_from_lib:
	echo copying .c...
	FOR %%i IN ($(CURLX_CFILES:/=\)) DO copy %%i ..\src\

clean:
	$(MAKE) /NOLOGO /F MakefileBuild.vc $@
